Colorbond Fence Extension Kit, 300mm Lattice (Per Bay)

Colorbond Fence Extension Kit: 300mm Lattice, Per Bay

Add 300mm of height and privacy to an existing Colorbond "Good Neighbour" fence without replacing it. Each kit covers one panel bay and includes every part needed to extend a 2.36m or 3.14m section.

What's in the kit (per bay)

• 1 x Standard Infill Panel (lattice, 300mm high)
• 2 x 300mm Extension Posts with Internal Brackets
• 1 x Colorbond Rail
• 18 x Tek Screws 10-16 (painted to match)

How many kits do I need?

Order one kit per panel bay. A run of 5 bays needs 5 kits. Where bays share a post, you will have spare extension posts.

Lattice patterns

• Horizon: horizontal slotted pattern for a clean, contemporary line
• Diamond: classic diamond lattice for a traditional look

Bay sizes

• 300mm (H) x 2360mm (W): suits standard 2.36m bays
• 300mm (H) x 3140mm (W): suits 3.14m bays

Installation overview

1. Measure each bay between post centres to confirm 2.36m or 3.14m.
2. Fit an extension post into the top of each existing post using the internal bracket and fix with tek screws.
3. Sit the lattice infill panel on the existing top rail, between the two extension posts.
4. Fit the new Colorbond rail over the top of the lattice.
5. Fix the panel and rail to the extension posts with the supplied tek screws.

Tools needed: cordless drill with hex bit, tape measure, tin snips or angle grinder.

Only need the lattice panel?

If you already have extension posts and rails, buy the Colorbond Lattice Top panel on its own.

Not sure what suits your fence? Call Balcatta on 08 9450 1626 or Davenport on 08 9795 3447.