Centsys D3 Smart Motor Kit

The Centsys D3 Smart Includes:

1x Centsys D3 Smart Sliding Gate Opener
2x Centsys Nova Remote Controls
4x 1m Gate Racking
1x Pair of Manual Over-Ride Keys
1x Hardware Mounting Pack
Battery Backup

This motor is engineered for everyday residential use and brings smart, reliable automation to gates up to 300kg. Designed around simplicity and performance, the D3 SMART offers fast operation, intuitive smartphone control, dependable battery-driven power, and installer-friendly engineering. It is a modern, cost-effective upgrade for homes seeking convenience and security.

📱 Smart Control and Setup

You can configure and operate the D3 SMART directly from your smartphone using the MyCentsys Remote app via Bluetooth. The intuitive interface provides access to setup, diagnostics, and notifications, allowing you to manage your gate easily and efficiently. The onboard intelligent control system is designed to simplify commissioning and reduce installation time.

🔋 Reliable Battery-Driven Power

The D3 SMART runs entirely on a robust 12V battery system, ensuring continuous operation even during power failures. With a 7.2Ah battery, the unit delivers dozens of operations per day in backup mode. The smart charger outputs 1.8A at 14.3V with onboard diagnostics to maintain optimal battery health and long-term reliability.

🔐 Advanced Security

Security is built into the hardware. The improved theft-resistant cage helps keep the motor protected from tampering, while the unit’s electronic collision sensing provides safer operation by detecting unexpected obstructions. This makes the D3 SMART a dependable choice for family homes and small residential properties.

⚙️ Precise and Efficient Performance

The motor delivers smooth, fast operation with speeds of up to 24m/min depending on load. Its strong push force—18kgf starting and 12kgf rated—ensures reliable movement for lightweight gates. Designed with installers in mind, the D3 SMART includes simplified wiring, streamlined setup, and a key-release manual override for emergency access.

📡 Wireless Safety Ready

The system supports Photon SMART wireless safety beams, providing a fully cable-free safety solution. This ensures seamless installation and enhanced gate protection with minimal effort.

Technical Specifications:

• Input Voltage: 110V – 240V AC @ 50/60Hz
• Current Consumption (Mains): 320mA peak
• Battery System: 12V battery-driven (Standard Capacity – 1×12V)
• Battery Charger Output: 1.8A @ 14.3V ± 5% (28W)
• Duty Cycle (Mains Present): 25% (at 25°C)
• Max Gate Mass: 300kg
• Max Gate Speed: Up to 24m/min (400mm/sec)
• Motor Push Force (Starting): 18kgf
• Motor Push Force (Rated): 12kgf
• Maximum Operations per Day: 20 cycles (typical)
• Operations in Backup Mode (7.2Ah Battery): Up to 90 (half-day) or 70 (full-day), depending on load
• Collision Sensing: Electronic
• Manual Override: Lockable key-release system
• Onboard Receiver: Code-hopping multichannel receiver
• Receiver Capacity: 32 remotes
• Receiver Frequency: 433.92MHz
• Auxiliary Power Output: 12V 300mA max (resettable fuse)
• Main Control Card Protection: Serviceable 35A fuse
• Charger Protection: Non-serviceable 3A slow-blow fuse
• Operating Temperature: –15°C to +50°C
• Ingress Protection: IP55
• Packed Unit Mass: 6.7kg (excluding rack and battery)
• Dimensions (Packed): 325mm (W) × 245mm (D) × 395mm (H)

Kit Includes:

• 1× Centsys D3 SMART Sliding Gate Opener
• 2× Centsys Nova Remote Controls
• 4× 1m Gate Racking
• 1× Pair of Manual Over-Ride Keys
• 1× Hardware Mounting Pack
• 1× Battery Backup